For Builders & Roofers
Made-to-Measure Leadwork for Builders & Roofers
Send us your measurements and we'll fabricate your leadwork, ready for your team to fit. Or we'll come to site and fit it ourselves.
- Made to your measurements
- Any lead code, bossed or welded
- Supply only, or supply and fit
How trade orders work
Measure, Send, Fit
- Send your sizesA sketch with measurements, the roof pitch and the tile or slate. Photos help.
- We make it upCut, bossed and welded to your sizes, in the code the job needs.
- You fit it, or we doReady for your team to fit, or book us to fit it on site.
- 35+ Years' ExperienceFamily-run roofing company
- Free Written QuotesKnow the price before you decide
- No Call-Out ChargesAnd no hidden costs
- Open 7 Days7am to 6pm, every day
- Leadwork SpecialistsMade and fitted by us
What We Make
Leadwork Made to Your Sizes
Most of what goes on a domestic roof, plus one-offs from a drawing or the old piece.
- Chimney flashing setsAprons, step flashings, back gutters and saddles.
- Step and cover flashingsMarked out to your roof pitch and brick courses.
- Bay and canopy coversMade to your sizes, bossed or welded.
- Dormer cheeks and topsCheeks, tops and aprons to your sizes.
- Lead slatesFor soil pipes, vents and flues, sized to the pipe and pitch.
- Valley and gutter liningsOpen valleys, parapet and box gutters.
- Cappings and weatheringsFor parapets, copings, ledges and sills.
- SoakersFor plain tile and slate abutments.
- One-offsSend a sketch, or a photo of the old piece, and we'll make it.
Measuring Guide
Measuring a Chimney
For a chimney flashing set, these three sizes and the roof covering are usually all we need.
- Stack width across the front, measured on the brickwork.
- Stack depth from front to back, down the slope.
- Roof pitch in degrees. A phone app is fine, or send a photo with a level in shot.
Tell us the tile or slate, its gauge if you know it, and the lead code you want. Not sure? Send photos and we'll advise.
Trade Order Form
Send Us Your Measurements
We'll come back to you with a price. Add photos or a sketch if you have them.
Rather Talk It Through?
Call us07722 011601 WhatsAppSend a sketch or photos Emailinfo@seleadworks.co.ukFAQs
Trade Order Questions
Can't see your question? Give us a call or send a WhatsApp and we'll help.
What do you need from me to quote?
The sizes of each piece, the roof pitch, the tile or slate and the lead code you want. A sketch and a few photos help. For a chimney, measurements A, B and C from the drawing are usually enough.
Which lead code should I order?
It depends on the piece. Code 4 is typical for flashings and Code 5 for back gutters and bay roofs. If you're not sure, choose 'Not sure' on the form and we'll advise.
Can you fit it as well?
Yes. Choose 'Supply and fit' and give us the site postcode.
Homeowner Rather Than Trade?
We fit everything we make. Ask for a free written quote for your leadwork or roof.